TQM4M9073 through line applications ? general purpose wireless ? rf bypass paths ? microwave radio ? test & measurement ? scientific instruments 16-pin 3x3mm leadless smt package product features functional block diagram ? dc C 6 ghz ? 50 ohm port impedance ? low insertion loss, <0.1db at 2.14ghz ? 1.2:1 vswr at 2.14 ghz ? surface mountable datasheet: rev d 12-14-10 - 1 of 7 - disclaimer: subject to change without notice ? 2010 triquint semiconductor, inc. con necting the digital world to the global network ? pin configuration pin # symbol 2, 11 rf i/o 1, 3, 4, 5, 6, 7, 8, 9, 10, 12, 13, 14, 15, 16 no connect backside paddle no connect ordering information part no. description TQM4M9073 through line general description the TQM4M9073 is a passive low-loss through line that operates from 0 to 6.0 ghz. at 2.14 ghz, input and output return loss is greater than 22 db and typical insertion loss is 0.1 db. the product is housed in an industry standard pb-free / rohs-compliant surface- mount leadless package. typical performance standard t/r size = 2500 p cs. on a 7 reel parameter units typical value frequency mhz 960 2140 2500 3000 insertion loss db <0.1 0.1 0.13 0.17 input/ output return loss db 32 25 23 20 downloaded from: http:///
TQM4M9073 through line datasheet: rev d 12-14-10 - 2 of 7 - disclaimer: subject to change without notice ? 2010 triquint semiconductor, inc. con necting the digital world to the global network ? no te: insertion loss data represents tq m4m9073 performance with pcb losses de-embedded. insertion loss measured on a pcb will exhibit the loss contributions of the pcb material. pin description pin symbol description 2, 11 rf i/o rf through path (bi-directional) 1, 3, 4, 5, 6, 7, 8, 9, 10, 12, 13, 14, 15, 16 backside paddle nc no electrical connection. land pads should be provided for pcb mounting integrity. absolute maximum ratings parameter rating storage temperature -55 to +150 o c recommended operating temperature range -40 to +150 o c operation of this device outside the parameter ranges given above may cause permanent damage specifications electrical specifications parameter conditions min typical max units operational frequency range 0 6 ghz port impedance (0 to 6 ghz) 50 ? t lead = +25oc insertion loss 0.1 0.3 db f=2140 mhz 25 db return loss -1 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0 00 . 511 . 522 . 5 insertion loss (db) frequency (ghz) insertion loss vs frequency -50 -40 -30 -20 -10 0 00 . 511 . 522 . 5 return loss (db) frequency (ghz) input / output return loss vs frequency 3 3 downloaded from: http:///
TQM4M9073 through line mechanical information package information and dimensions package style: 16-pin 3x3 leadless smt this package is lead-free/rohs-compliant. the plating material on the leads is enig (electroless nickel immersion gold). it is compatible with both lead-free (maximum 260 c reflow temperature) and lead (maximum 245 c reflow temperature) soldering processes. part marking assembly code. 4m9073 datasheet: rev d 12-14-10 - 3 of 7 - disclaimer: subject to change without notice ? 2010 triquint semiconductor, inc. con necting the digital world to the global network ? pin 1 location: upper left hand corner li ne 1 C pin 1 (orientation) dot & triquint line 2 C product name: 4m9073 line 3 C yyww = year/week line 4 C assembly code xxxxxx ww downloaded from: http:///
TQM4M9073 through line mounting configuration all dimensions are in millimeters (inches). angles are in degrees. datasheet: rev d 12-14-10 - 4 of 7 - disclaimer: subject to change without notice ? 2010 triquint semiconductor, inc. con necting the digital world to the global network ? downloaded from: http:///
TQM4M9073 through line manufacturing environments component handling all necessary special handling techni ques shall be adopted in order to av oid contamination of metallization / terminations. examples include use of finger cots, plastic tweezers, etc. part placement a placement force of up to 500 grams is applied (using a 2.00 mm or a 0.080 inch diameter rod) to the center of the part while remaining in its tape carrier. component solderability convection or infrared reflow part will comply with convection or infrared reflow soldering processe s consistent with ipc/jedec j-std- 020. triquint?s actual reflow profile for qualification is provided below: reflow parameters ipc/jedec j-std-020 triquint actual average ramp-up rate (217 ? c to peak) 3 ? c/second max. 0.57 ? c/second preheat time (150 ? c to 200 ? c) 60-180 seconds 150 seconds time above 217 ? c 60-150 seconds 126 seconds 26 0 +0/-5 ? c 259 ? c peak temperature time within 5 ? c of actual peak temperature 20-40 seconds 30 seconds ramp-down rate 6 ? c/second max. 0.875 ? c/second time 25 ? c to peak temperature 8 minutes max. 7 minutes max. material packaging and shipment in the absence of customer specific re quirements called out in the purchase order, material packaging and shipping requirements shall be a defined in the paragraph and in triquints standard procedure for the packa ging and shipment of ics in tape and reel. general tape and reel requirements carrier and cover tape physical dimensions datasheet: rev d 12-14-10 - 5 of 7 - disclaimer: subject to change without notice ? 2010 triquint semiconductor, inc. con necting the digital world to the global network ? downloaded from: http:///
TQM4M9073 through line esd protection to protect the devices and leads from esd damage, indi vidual parts shall be placed in static protected tape and reels, tubes, bags, trays, or in waffle packages. moisture resistant packaging the product will be shipped in accordance with jedec j- std-033 where applicable. datasheet: rev d 12-14-10 - 6 of 7 - disclaimer: subject to change without notice ? 2010 triquint semiconductor, inc. con necting the digital world to the global network ? downloaded from: http:///
TQM4M9073 through line datasheet: rev d 12-14-10 - 7 of 7 - disclaimer: subject to change without notice ? 2010 triquint semiconductor, inc. con necting the digital world to the global network ? product compliance information msl rating the part is rated moisture sensitivity level 3 at 260c per jedec standard ipc/jedec j-std-020. solderability compatible with the latest version of j-std-020, lead free solder, 260 this part is compliant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazardous substances in electrical and electronic equipment). this product also has the following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free ? tbbp-a (c 15 h 12 br 4 0 2 ) free ? pfos free ? svhc free contact information for the latest specifications, additional product information, worldwide sales and distribution locations, and information abou t triquint: web: www.triquint.com tel: +1.503.615.9000 email: info-sales@tqs.com fax: +1.503.615.8902 for technical questions and application information: email: sjapplications.engineering@tqs.com important notice the information contained herein is believed to be reliable. triquint makes no warranties regarding the informati on contain herein. triquint assumes no responsibility or liability whatso ever for any of the information contained herein. triquint assumes no responsibility or liability whatsoever for the use of the information contained herein. the information contained herein is provided "as is, where is" and with all faults, and th e entire risk associated with such information is entirely with the user. all information contained herein is subject to change without notice. customers should obtain and verify the latest relevant information before placing orders for triquint products. the information contained herein or any use of such information does not grant, explicitly or implicitly, to any part y any patent rights, licenses, or any other intellectual prope rty rights, whether with regard to such information itself or anything described by such information. triquint products are not warranted or authorized for use as critical components in medical, life-saving, or li fe-sustaining applications, or other applications where a failure would reason ably be expected to cause severe personal injury or death. downloaded from: http:///
|
